Polyaspartic PS90™ 8L Clear has versatile qualities which allows it to be used for a top coat, stand-alone and as a binder for non-skid surfaces. Polyaspartic PS90™ is a 90% solid, aliphatic non-yellowing, heavy duty, two-pack system and is useful for residential, commercial and industrial environments. Due to its fast-curing agents, this product can be used as a one-day system for driveways, protective flooring and decorative finishes, such as flake floor.
Direction For Use: Refer to the technical data sheet. In general, surface to be treated MUST be clean and free of all traces of loose material, dirt, debris, mildew, oil, grease, old coatings, curing compounds, release agents, laitance and other contaminants, and any moisture. Mix Polyaspartic PS90™ (1 Parts A) with Polyaspartic PS90™ Hardener (1 Part B). Use a mechanical mixer to ensure thorough mixing. The mix ratio is 1:1 by volume.
Application: Lint free Epoxy Roller, Brush.
Coverage: 5 – 10m2/L depending on porosity of substrate and application methods.
Dry Times: Touch dry: 2 – 6 hours, Recoat window: 6 – 16 hours, Hard Dry/Light Foot Traffic: 12 – 24 hours, Full cure: 48 hours. All drying times depend on temperatures, humidity and application methods. One coat only recommended, unless substrate is extremely porous or solvent is used for dilution.
Clean Up: Clean all equipment with Solvent SLP100™. Refer to the technical data sheet for detailed information.
Size: 8L Kit