Metallic Colour Pigments™ Silver Glitter adds an incredible sparkle to surfaces and enhances any 3D epoxy flooring design. The glitter can be used with all Durable Concrete Coatings clear resins and can also be added on top of Colour Flakes for an extra pop! These unique glitters are easy to use and apply. They are designed to give your epoxy flooring that extra shine factor.
Directions For Use: Mix Metallic Colour Pigments™ Silver Glitter with Metallic Epoxy EP100™ or Premium Epoxy EP100™ Part A. Use a mechanical mixer to distribute the pigments properly and ensure thorough mixing. Avoid aeration when mixing the product, mix for 10 minutes and leave for 20 minutes to allow any aeration to dissipate. Do NOT mix Metallic Colour Pigments™ Silver Glitter at the same time with Part A and Part B of two pack systems. Always add Part B after Metallic Glitter has been fully dispersed and any aeration has disappeared. We recommend mixing Metallic Colour Pigments™ at least 24 hours prior to application into Metallic Epoxy EP100™ or Premium Epoxy EP100™ Part A.
Clean up: Broom, dustpan, or wet mop. Refer to Safety data sheet for more information.
Disclaimer: This colour chart and any colour swatches are to be used as a GUIDE ONLY. The printed colours are reproduced as close as modern printing techniques allow. The finished colour may vary depending on products, surface variation, substrates, job conditions, textures and finishing practices. It is recommended to apply a sample to a small area of the substrate prior to the full application to confirm the desired colour accuracy. Durable Concrete Coatings ® Pty Ltd does not hold any liability or indemnity in relation to colour variations.