Metallic Colour Pigments™ are special effect pigments used to create pearlescent and iridescent effects that mimic the natural look of stone and rock formations. These unique pigments are designed to give the coating a shine that reflects light and creates an eye-catching, dramatic colour. Metallic Tint Pack is intended to achieve multiple colour hues and designer look coating finishes with excellent colour fastness.
Directions For Use: Mix Metallic Colour Pigments™ with Metallic Epoxy EP100™ or Premium Epoxy EP100™ Part A. Use a mechanical mixer to distribute the pigments properly and ensure thorough mixing. Avoid aeration when mixing the product; mix for 10 minutes and leave for 20 minutes to allow any aeration to dissipate. Do NOT mix Metallic Colour Pigments™ at the same time with Part A and Part B of two pack systems. Always add Part B after Metallic Colour Pigment has been fully dispersed and any aeration has disappeared. We recommend mixing Metallic Colour Pigments™ at least 24 hours prior to application into Metallic Epoxy EP100™ or Premium Epoxy EP100™ Part A.
Coverage: One 120g jar per 12L Metallic Art Epoxy EP100® or Premium Epoxy EP100™ kit.
Clean Up: Broom, dustpan, or wet mop. Refer to Safety data sheet for more information.
Disclaimer: This colour chart and any colour swatches are to be used as a GUIDE ONLY. The printed colours are reproduced as close as modern printing techniques allow. The finished colour may vary depending on products, surface variation, substrates, job conditions, textures and finishing practices. It is recommended to apply a sample to a small area of the substrate prior to the full application to confirm the desired colour accuracy. Durable Concrete Coatings ® Pty Ltd does not hold any liability or indemnity in relation to colour variations.